High definition wholesale Disk Brake Electric Tricycle for Disabled or Old People (TC-017) to Indonesia Importers
High definition wholesale Disk Brake Electric Tricycle for Disabled or Old People (TC-017) to Indonesia Importers Detail:
|Motor||brushless hub motor 350W|
|Battery||48V12Ah sealed lead-acid battery All battery with electric protection circuit|
|Controller||350W Brushless controller|
|Charging time||6-8 hours|
|Performance & Main components|
|Range||50km(distance by riders weight,terrain,road sufurface etc.)|
|Tyres||22″ /20″ *1.95|
|Product colour||customer’s request|
|Front brake||drum brake|
|Front fork||hydraulic pressure|
|Rear brake||drum brake|
|Throttle||Twist intelligent speed control|
|Unit packaging||Each in a carton Box|
|Qty / Export carton||1 pc /ctn|
|Export carton dimension||88X28X72CM|
|1×20′footer FCL quantity||104pcs|
|1×40′footer FCL quantity||248pcs|
The price above are based on FOB Ningbo(Zhejiang Province,China).
The quotation is valid within 15 days, we reserve the right to modify the prices if needed.
The prices above are for your reference only, it is subject to our final confirmation.
Product detail pictures:
High definition wholesale Disk Brake Electric Tricycle for Disabled or Old People (TC-017) to Indonesia Importers, The product will supply to all over the world, such as: , , ,
Robiton LA12-900 ChargerYou can use Robiton LA12-900 charger to charge 12-volt sealed lead acid storage batteries with the capacity ranging from 4 to 12 ampere hours. It charges batteries at the current of 900 mili-amperes. It works at the mains power of 15 Watt. This device offers protection against short circuits, overloads, overheating and polarity reversal. In case of polarity reversal, the charger beeps and a red LED lights up.The charger has an impulse circuit. It switches off automatically and is equipped with LED indicators. Connect the charger to the power mains, you will see a green LED light up. Then connect a storage battery to the charger; a green LED will light up and then go off. This means that charging has started. Please, observe polarity: the red color stands for a positive side while the black color stands for a negative side. After charging has finished, a green LED will light up to signal that the storage battery is completely charged. Then remove the battery from the charger and disconnect the charger from the mains. This charger can operate within a broad range of input voltages without any changes in output parameters. You can easily use it well-aired rooms under moderate climatic environment.
You can use it on any Power Wheels (from 6 Volt and up) or even ANY electrical car, bicycle, scooter, golf carts etc.
Do you really need % of battery left? I guess you need to know how far you can go on that battery. So here its is. You install it and it will measure the distance you can get (without drifts and doughnuts) on full charge. Then program this in a number of seconds into this controller and you will get among other useful information always up to date distance you(your child) can get with the charge left on that battery*. It didn’t count actual distance gone, but it count seconds motor was on (assuming full power and moving speed are constant) and multiply to preprogrammed average speed.
1) Current (since battery was charged) trip distance with 2 decimals in any units Km or Miles or Knots
2) Current (since battery was charged) running time in hours and minutes and tens of seconds
3) Distance left on this charge of the battery (using preprogrammed Max running time on full charge).
4) Total running time
5) Total distance gone
6) Current battery voltage
Counters values are automatically saved to internal flash memory, so disconnecting power will not reset them. Manual reset of current trip/charge and totals is available. Reset button click resets current/charge (incrementing totals). Powering ON with reset button pressed resets all totals.
Components: one 1.5×1.5″ PCB, 5 resistors, 3 diodes, 2 capacitors, one reset button, one power switch, DIP 8 pins Socket Adaptor, 3pin Screw Terminal Block, one positive 5v voltage regulator 7805, one ATtiny85 micro controller (programmed from Arduino IDE), one 8 segment 4 digit LED Display (with I2C interface).
Total of $12-15
for code and more details visit https://chouck.com/docs/PowerWheelsOdomiter and https://github.com/chouckz/PowerWheelsOdomiter
Guide how to program ATtiny85 micro controller https://www.youtube.com/watch?feature=endscreen&v=30rPt802n1k&NR=1
just don’t forget to flash boot loader with proper clock settings 8mhz first.
*keep in mind that battery performance and capacity can deteriorate in lower temperatures and after long storage. So notice voltage drop ding battery with working motor.
By from -
By from -