OEM manufacturer custom Mobility Scooter with LED Light (ES-018) for Pakistan Factory
OEM manufacturer custom Mobility Scooter with LED Light (ES-018) for Pakistan Factory Detail:
|Motor||different speed brushless motor 350W / 500W|
|Battery||48V/60V 12Ah 48V 20Ah sealed lead-acid battery All battery with electric protection circuit|
|Charging time||around 8hours|
|Performance & Main components|
|Max.speed||25km/h（USA&Canada) ; 32km/h(Europe)|
|Range||50KM(48V12AH) 70km (48V20AH)|
|Product colour||customer’s request|
|Front brake||drum brake|
|Front fork||hydraulic pressure|
|Rear brake||Expanding brake|
|Brake lever||cut-off when braking|
|Throttle||Twist intelligent speed control|
|Unit packaging||Each in a carton Box|
|Qty / Export carton||1 pc /ctn|
|Export carton dimension||168X56X108CM|
|1×20′footer FCL quantity||48pcs|
|1×40′footer FCL quantity||90pcs|
The price above are based on FOB Ningbo(Zhejiang Province,China).
The quotation is valid within 15 days, we reserve the right to modify the prices if needed.
The prices above are for your reference only, it is subject to our final confirmation.
Product detail pictures:
OEM manufacturer custom Mobility Scooter with LED Light (ES-018) for Pakistan Factory, The product will supply to all over the world, such as: , , ,
Testing a 12 volt to 220 volt – 500 watt, power inverter from CDR King. It’s connected to a Motolite Solar Master 100 Ah battery which is charged by my solar panels.
The inverter was putting out around 238 volts and my laptop was drawing around 35 watts.The inverter cost 950PHP (24 USD).
CDR-King also stock inverters which include a usb port on the back but I already have a 12V to 5V 2 amp usb adapter wired up which I think is likely more efficient than running a big inverter just for USB power.
Simple power supply unit for amplifier. Design option.Self-assembly of low-frequency amplifiers with popular microcircuits of different capacity has become widespread in amateur practice. Their internal design allows in shortest terms, usually with minimal details, without any complicated settings, assemble a decent power amp for home use.Very often we use equipped kits available commercially which are especially in demand among the newcomers. As a rule, those kits do not include power supply units required for amplifier operation.Therefore, I suggest a very simple and reliable option of design using some outdated but quite usable components.Casing! The box was borrowed from an old computer unit, which were utilized in hundreds. But hardware is hardware, in addition having built-in fan and lots of space.Strap from an old tape recorder with adapted general switch, network protective strip, switch on indicator and, just-in-case forced activation of the fan if needed.The core of the design is a power transformer with two output windings for 27V, load current 2.5A per each, more precisely ТТП120.Diode bridge should preferably be powerful. Let’s use KBPC1502 with maximum current of 15A.Two filtering capacity of 10000mkf.And, at last, standard connector with wires from former computer unit to connect to amplifier board with existing presence of the response slot.This design is intended for the bipolar powering of amplifier with output voltage of ± 27V.Power supply schematic is easy to produce. It has been long applied in practice by many beginning designers and works flawlessly. If desired, you can change source option, using one of the windings, or even connect them in parallel for two-fold increase in capacity of power transformer and thus the power supply unit itself, which can be used for unipolar amplifiers.
By from -
By from -