Professional Manufacturer for 26″ City Electric Bike with Aluminum Frame (TDE-038A) for Lithuania Importers
Professional Manufacturer for 26″ City Electric Bike with Aluminum Frame (TDE-038A) for Lithuania Importers Detail:
|Motor||250W High speed brushless DC motor
|Battery||36V,10AH Li-ion battery|
|Charge||AC 110V-240V 50/60HZ|
|Performance & Main components|
|Max.speed||25km/h (EU) or 32km/h(USA&Canada)|
|Tyres||KENDA 26 “×1.95|
|Front fork||hydraulic suspension|
|Brake||Fornt disk brake / Rear disk-brake|
Product detail pictures:
Professional Manufacturer for 26″ City Electric Bike with Aluminum Frame (TDE-038A) for Lithuania Importers, The product will supply to all over the world, such as: , , ,
This is my DIY electric bike. Its powered by two 3cell 5.0Ah lipo batteries (series), running thru a 200A speed controller which feeds a 170kv/3250W brushless motor (TGY Aerodrive Series 63-74). Currently due to gearing limitations and voltage I am running at ~30amps during maximum speed, still this pushes me and the bike to 48km/h on the flat. The batteries are rated to a 25-30C discharge rate so everything runs nice and cool at this setting…I may try machining an knurled case to wrap around the motor can to decrease my gearing and increase my speed .
The whole project cost me about $200-300 and added an extra 5 or so pounds to an already light weight single speed bike…quite amazing what is possible with off the shelf technology!
Should give the lycra’s a run for their money on my morning commute.
By from -
By from -