Rapid Delivery for Disabled Electric Tricycle (TC-015) for Florida Importers
Rapid Delivery for Disabled Electric Tricycle (TC-015) for Florida Importers Detail:
|Motor||brushless hub motor 500W|
|Battery||48V20Ah sealed lead-acid battery|
|Charging time||8-10 hours|
|Performance & Main components|
|Range||70km(distance by riders weight,terrain,road sufurface etc.)|
|Product colour||customer’s request|
|Front brake||drum brake|
|Front fork||hydraulic pressure|
|Rear brake||drum brake|
|Throttle||Twist intelligent speed control|
|With rheostat (adjust max speed from 0km/h to25km/h)|
|With reverse gear|
|Unit packaging||Each in a carton Box|
|Qty / Export carton||1 pc /ctn|
|Export carton dimension||144X68X106CM|
|1×20′footer FCL quantity||20pcs|
|1×40′footer FCL quantity||48pcs|
The price above are based on FOB Ningbo(Zhejiang Province,China).
The quotation is valid within 15 days, we reserve the right to modify the prices if needed.
The prices above are for your reference only, it is subject to our final confirmation.
Product detail pictures:
Rapid Delivery for Disabled Electric Tricycle (TC-015) for Florida Importers, The product will supply to all over the world, such as: , , ,
This video from Sears PartsDirect shows how to adjust a reed switch in an elliptical. Attached to the frame, the reed switch detects a magnet attached to the rotating pulley to sense the elliptical’s speed. The reed switch transmits the speed signal to the console which displays the speed and distance. If the console doesn’t display the correct speed, the reed switch may not be close enough to the magnet. Adjust the reed switch using the steps in this video.
Visit us at:
Or call 1-800-437-1673 to speak with a parts specialist.
The video includes these parts and tools. Look up your model to make sure you get the right parts for your garage door opener.
Find parts for your elliptical at
Or click here to schedule an appointment with a repair technician. https://www.searshomeservices.com/repair#showall
The reed switch detects a magnet attached to the rotating pulley to sense the elliptical’s speed. It then transmits the speed signal to the console, which displays the speed and distance. If the console doesn’t display the correct speed, the reed switch may not be close enough to the magnet. Adjust the reed switch using the steps in this video. Before you begin, wear work gloves to protect your hands. Pry up the lower upright cover using a slot screwdriver. Slide the cover up to release it from the side shields. Remove the left pedal arm cover screw and pull the cover off. Using an Allen wrench, remove the reverse threaded screw from the left crank arm by turning it clockwise. Pull the left pedal arm and washers off the crank arm shaft and push the pedal arm forward. Remove the screws from the left and right side shields. Remove the left side shield. Loosen but don’t remove the reed switch mounting screw. Rotate the pulley to align the magnet with the reed switch. Adjust the reed switch gap to about 1/8-inch from the pulley magnet. Tighten the reed switch mounting screw. With the console off, rotate the pulley to move the magnet past the reed switch to see if the display lights up. If the display lights up, the reed switch is detecting the magnet and the adjustment is complete. Readjust the reed switch if the console doesn’t light up. Line up the side shields. And reinstall the shield mounting screws. Push the left pedal arm over the end of the crank arm shaft. Reinstall the D-washer on the crank arm shaft. Slide the lock washer and flat washer on the Allen screw. Reinstall the reverse threaded screw into the crank arm and by turning it counterclockwise. Position the pedal arm cover over the crank arm shaft. Reinstall the pedal arm mounting screw. Slide the lower upright cover down and snap it over the side shields.
50cc Atv Four Wheeler Quad For Sale – Model: 6B Call 1-866-606-3991 https://www.SaferWholesale.com/atvs
By from -
By from -