Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories

Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories Detail:

Motor Brushless hub motor 350W
Battery 24V10AH Lead-acid ,24V15AH Lithium battery
Controller   Intelligent controller
Charging time 6~8 hours
Front brake “v” brake
Rear brake Expension brake
Tires 10×4″
Fold folded
Color Red,green
GPS add 35USD
Stopwatch add 6USD
Mobile holder add 3USD
Rear basket add 4USD
Mirror add 6USD
Helmet add 6.5USD

 


Product detail pictures:

Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories detail pictures

Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories detail pictures


Renewable Design for 350W Folding Electric Bike with Lithium Battery (MES-009) for Macedonia Factories, The product will supply to all over the world, such as: , , ,


  • Demonstration of the 3 Wheel electric bike pusher



    This is a how-to video guide for installing new batteries in a Pride Jazzy Select Elite Mobility Scooter Chair. Does your mobility wheelchair need new batteries or did you buy new electric wheelchair batteries and need to know how to install them? This is the video for you. Notes and dialogue added below.

    “Hi my name is Richard price from high-Tech Battery, today we’re going to be working on a Pride Jazzy Select 6 mobility chair that a customer brought in to us to check the batteries but they need to be replaced. So the first thing that you need to do with the Jazzy is you’re going to have to remove the seat, in order to do that there is two connections. The first is going to go into the scooter and the next is this single lever here. Where when you pull it back it will release the actual seat itself. Make sure you unplug this portion first before removing the lever and pushing the seat upward. So after you’ve done that you’re going to get to the actual base of the scooter itself. All you have to do here is pull up and away the actual cover and that will expose both of the batteries here. And as you can see your open terminals are all open to view here so you can see how everything is nice and tight. And were going to go ahead and check them. Okay so the first thing that the customer has requested that we do is test the batteries themselves to see if they are bad. Now according to him he had just purchased the chair so it has been sitting for an indefinite amount of time. So the first thing we will do is check the voltage. To do that you will have to expose the positive and negative terminal of both batteries by removing these plastic pieces and moving them down the wire here. Once we do that we will use our volt meter and set the setting to 20 DC and we’ll just touch positive to positive and negative to negative on the same battery. This battery is coming in at 0.13 volts. So the first thing we’re going to do here is loosen up and remove these wires, everything on this particular Jazzy Select 6 model here is going to be 10mm we’ve already gone ahead here with a ratchet and a wrench here and we’ve gone through and loosened all the connections prior to this. So we’re just going to remove the wires here, now i personally like to remove the positive wires of both batteries here to eliminate the possibility of shorting out while you are installing new batteries so we’ll do the first set here first. Make sure you do keep the hardware here because you will end up reusing it. Okay and then the wires from the second set here. Okay so now you can pull these away as you can see theres only two sets of wires here clearly identified so you can’t mix them up, we’re going to pull our batteries out. Alright we already have the replacement set sitting here waiting so we’re going to put those in. Okay now we’re going to hook them back up so as you can see this is pretty simple the positive is red and the black is black so we’re going to go ahead and hook the positive up first just the way it came off. We’re just going to make them hand tight Okay so positive there and we’re going to hook up the second positive here. I like to hook up the positives first to eliminate any possibility of shorting on the frame I just think its a good idea whenever you’re dealing with two sets of wires. One last negative. OKay and just double check to make sure everything is good and its positive to positive and negative to negative on wire one and then on wire two so we’ll take the wrenches here. So you don’t need to go crazy when you’re tightening them up but you don’t need to grind into the lead terminal. Put the caps back on there And we’ll move onto the negative, then the other side. Okay we’ve put the covers back on here. And when you’re done you can put the cover back on. Just like so and you have successfully replaced the batteries in your Jazzy scooter. So just replace the cover here. Okay we’ll snap it in the back and you’re all set!”

    Contact us if you have any questions about what you saw in our video segment here. We would be more than happy to help answer your questions about purchasing or installing wheelchair batteries or to determine which batteries you might need! You can find our full suite of electric wheelchair batteries at https://www.techbatterysolutions.com/Wheelchair-Batteries-s/213.htm?searching=Y&RefineBy_2835= as well as find batteries for a variety of other applications at our full site www.techbatterysolutions.com. Thank You for watching.

    toll free phone – (877) 775-4381


    5 Stars By from -

    5 Stars By from -

    Related Products

    WhatsApp Online Chat !